GoldenMotor.com Forum

General Category => Magic Pie & Smart Pie Discussions => Topic started by: Flipseth on January 17, 2015, 01:23:40 AM

Title: Wiring diagram for SP4
Post by: Flipseth on January 17, 2015, 01:23:40 AM

Has the wiring diagram for the Smart Pie 4 changed from the mp3 diagram, I have been trying to find the diagram but have been unable too.

Thanks Phill

Title: Re: Wiring diagram for SP4
Post by: Bikemad on January 17, 2015, 11:19:47 AM

Hi Phill and(https://i.imgur.com/evDSMvT.png)to the forum.

This is the latest diagram for the Smart Pie but it is a bit out of date now and is slightly different to the Later MPIII and current MP4/SP4:

(http://www.goldenmotor.com/e-Bike-DIY/MP3%20SmartPie%20Wiring%20Layout.jpg)

The external connections for Pedelec, Reverse, Lights and Horn are still the same but the main harness connector uses a 10 pin connector instead of 8 and for some unknown reason, the other connectors on the harness now have exposed pins instead of recessed sockets. ::)

Alan
 

Title: Re: Wiring diagram for SP4
Post by: Flipseth on January 17, 2015, 03:01:42 PM

Thanks for the fast reply.

I suspected that was the case but I did not want to cut or seal off the wrong wires.

Thanks  Phill