GoldenMotor.com Forum
General Category => Announcements from GoldenMotor => Topic started by: Bikemad on January 10, 2010, 08:45:42 PM
-
For those of you who haven't looked around the GM website (http://www.goldenmotor.com) for a while, there have been some noticeable new additions that have recently appeared.
Some of these have already been announced by GM, but not all of them, so I thought I would give them a quick mention here anyway.
This very neat seat post mounted rack for the sliding battery pack:
(http://goldenmotor.com/e-Bike-DIY/RAK-002.jpg)
High Speed 480rpm 16" Cast Alloy Magic Pie now available in Front or Rear fitting:
(http://www.goldenmotor.com/hubmotors/hubmotor-imgs/MagicPie%2016in.jpg) (http://goldenmotor.com/SMF/index.php?action=dlattach;topic=1430.0;attach=1409;image)
The Twin Magic Pie Dual Drive conversion:
(http://www.goldenmotor.com/JDbike/MP-DualDrive.jpg)
A new lightweight folding eBike:
(http://www.goldenmotor.com/JDbike/1SfoldingEbike.jpg)
And finally a rear axle unit with built in gear reduction and differential unit:
(http://www.goldenmotor.com/eCar/IntegralBridge.jpg)
Intended for use with the 5KW HPM5000B BLDC Motor:
(http://www.goldenmotor.com/eCar/GM%20All-in-One%20Car%20Kit.jpg)
Programming device for the HPC100B controller:
(http://www.goldenmotor.com/programmableDeviceForHPM5000B%20Controller.jpg)
Yao,
Any chance you can provide some more details (price and availability etc.) on the above items.
Alan
-
Hello Yao,
Would love to receive the new Bat rack, I got one through the mail that was bent in all directions.
See on my review in this forum here http://goldenmotor.com/SMF/index.php?topic=1490.msg8336#msg8336 (http://goldenmotor.com/SMF/index.php?topic=1490.msg8336#msg8336)
Maybe You can send me one And I will write a honoust review about it.
Regards Jeroen Compagne
The Netherlands.
-
i got my rack yesterday, do you need any info.don't hasitate ask me
-
Would you review it?? ;D
-
sure, this afternoon
-
On mine there were two issues.
1) the clamp is for a larger seat post.
Alternate sizes should be available.
2) The dimple for the lock was too
shallow. I had to put the each in a vise
and drive it up a little.
While not a review point, I added a trunk
lifter to offset the weight of the battery
which helps a lot for bumps. I need to
Keep looking for one that is long enough
but does not have too much pressure.