Author Topic: Required amperage question?  (Read 10758 times)

Offline Edemon

  • Confirmed
  • New Member
  • *
  • Posts: 5
Required amperage question?
« on: April 06, 2018, 01:05:36 AM »
Hello.. I’m trying to learn and understand basically by reading as much as I can..

I am looking at 5 to 10 kw motors and many look very impressive on paper with the torque and power ratings but are rated at 100 to 350 amps. I cant seem to find a single battery that has a constant discharge rate over 60 amps and most are 30 to 40 amps and rated surge amp at 60 ish.

Why are motors rated at such high amperage?

Offline MickMick

  • Confirmed
  • New Member
  • *
  • Posts: 13
Re: Required amperage question?
« Reply #1 on: April 07, 2018, 03:25:24 PM »
Start and acceleration torque requires high ampage. I could not find on that did what I wanted, so built my own battery.

Offline Edemon

  • Confirmed
  • New Member
  • *
  • Posts: 5
Re: Required amperage question?
« Reply #2 on: April 07, 2018, 11:50:26 PM »
How much amperage did you build for?

Offline Knightgreider

  • Confirmed
  • Junior Member
  • **
  • Posts: 43
Re: Required amperage question?
« Reply #3 on: January 29, 2019, 02:34:15 PM »
I built my own battery, you have to figure out the cells max amperage per cell and then see what the max draw and divide by the number of cells. I built mine out of 18650 cells.