General Category > Magic Pie & Smart Pie Discussions
Magic Pie 5 Vector with Bluetooth for Android/IOS
GM Canada:
Not that I am aware of.
GM Canada:
--- Quote from: Bikemad on August 06, 2015, 11:40:24 PM ---
I have asked Philip if the existing USB programming lead can still be used to program the controller, but I haven't had a reply yet.
Alan
--- End quote ---
Hi Alan,
I was thinking about this and it would seem obvious the USB programming cable would still work as you can't program the controller with the smart display.
Gotch ya!
8) 8)
Gary
Bikemad:
Hi Gary,
Just because you "can't program the controller with the smart display" it doesn't necessarily mean that you can program the MP5 controller with the MP4 USB cable.
It's a bit like assuming that the MP4 controller can be programmed with the MP III USB cable simply because it fits into the same connector. What may seem obvious is not always guaranteed to work. ;)
However, as the MP4 and MP5 both have vector controllers, I am expecting the MP4 USB programming cable to work with the MP5, but rather than just take it for granted that it will work, I simply wanted confirmation.
Have you tried to program one of the MP5 controllers with the MP4 USB programming lead to check that it works?
Also, if you are using the BAC-601 Smart Display with the MP5, it means that you cannot use the Bluetooth device at the same time for monitoring trip mileages, speed, motor rpm, current, voltages, battery levels, etc. as you can only use one or the other.
So you would still need to carry the plug-in Bluetooth device with you if you wanted to change any of the program parameters via your phone while out riding.
For those who still want a fixed display on the bike (and an easy to reach button for selecting the PAS levels) the obvious solution would be a display unit similar to the BAC-601 but with integrated Bluetooth to allow data monitoring/capturing along with additional programming options to be accessed via a smartphone.
One useful option I would like to see added to the app would be an "Off Road" mode that would instantly switch to pre-set higher speed and higher power settings for off road use which could simply revert back to street legal settings for highway use (and also disable the throttle if required).
It might be a good idea to have this function hidden and/or user password protected to avoid accidentally selecting the "Off Road" mode whilst riding on public highways.
I would also suggest having a quick and easy fail-safe way of exiting the "Off Road" mode like simply pressing and holding anywhere on the screen, just in case you find yourself being stopped by the police while accidentally riding on a public highway in "Off Road" mode.
Alan
GM Canada:
--- Quote from: Bikemad on August 09, 2015, 12:06:51 PM ---Hi Gary,
However, as the MP4 and MP5 both have vector controllers, I am expecting the MP4 USB programming cable to work with the MP5, but rather than just take it for granted that it will work, I simply wanted confirmation.
--- End quote ---
So we are both cautious and rightfully so. The introduction of new products, changes to design and new features are always a surprise to everyone. It is like ok we have something new, so how does it work?
--- Quote ---
Have you tried to program one of the MP5 controllers with the MP4 USB programming lead to check that it works?
--- End quote ---
Yes I have and I'll make a new video soon. We seem to have got passed the quirky connection method we used previously in the MP4.
--- Quote ---
Also, if you are using the BAC-601 Smart Display with the MP5, it means that you cannot use the Bluetooth device at the same time for monitoring trip mileages, speed, motor rpm, current, voltages, battery levels, etc. as you can only use one or the other.
--- End quote ---
True. One connection at a time. I intend to zip tie the Bluetooth device to the bike. You can see from the picture it would be quite simple to do. Sorry about the logo. I don't know what I did with the original picture.
This does make the Bluetooth device the less expensive route not requiring both a smart display and USB cable. But then you have to buy a mount for the device on your bike.
I made a short video to help people understand their options. Click here to see the VIDEO
--- Quote ---
For those who still want a fixed display on the bike (and an easy to reach button for selecting the PAS levels) the obvious solution would be a display unit similar to the BAC-601 but with integrated Bluetooth to allow data monitoring/capturing along with additional programming options to be accessed via a smartphone.
--- End quote ---
Agreed. I am sure its just a matter of time until we have this or something similar.
ONE LAST COMMENT!!
I should add. And its a bit of an apology to people trying to contact me. I just returned from vacation. This year due to family scheduling conflicts I had a week off, a week back at work and another week off. Now I am back at it. So if I missed your email or phone call just contact me again. I don't think Ill be able to catch up on the hundreds of emails I missed as I have a huge shipping backlog to clear.
One last little note: I'm finally giving up the day job. I can no longer work two full time jobs so now I'll be dedicating all my time to servicing customers needs!
Supchrgamx:
hey Allen
I agree with the offroad switch , that why I asked about the firmware upgrade
seems to be a max km\hr thing in Canada
that would be the only hurdle for me producing a world class bicycle with their system
still would want tail lite ,tell tail ,solid on street mode flashing on of road, no tail lite -no off road
even the 2nd version that I built , more so to test the technology has great reviews and have had offers to buy it,or build one for them. seems like I'm to busy riding to have time building, its an addiction
Laurence
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version