Author Topic: CRUISE CONTROL  (Read 2445 times)

Offline kmleon77

  • Confirmed
  • Bachelor of Magic
  • ****
  • Posts: 102
CRUISE CONTROL
« on: November 04, 2011, 07:46:41 PM »
HI
if I want to use the MP cruise control with another controller
what am I supposed to connect with?

I have a green and a black wire going out of the the cruise controll
and I have two wires going out of my new controller
can I connect the wires as I want or is there something I should know?

thanks for the answer
fred
2 MP external controllers and 1 MP internal (avatar)
2 VTT for fun and one yuba to take my children to school
all this with 48V10Ah lipo batteries
waiting for MP3 : is it going to be more powerfull ?????

Offline e-lmer

  • Technical Officer
  • Master of Magic
  • ******
  • Posts: 458
    • My page
Re: CRUISE CONTROL
« Reply #1 on: November 04, 2011, 10:05:07 PM »
I am not sure what your question is.

If you are talking about the cruise control
button on the throttle, you are correct, but
you should refer to the documents for the
other controller.

The cruise control is built into the controller.

It locks the throttle at a level until either
the brake switch or the cruise control
switch is toggled.

You can't hook up two controllers to one
motor.  Well, you can, but the results
will be surprising at best.